4-7GHz SPST Absorptive PIN Diode Switch,SW00494
The SPSTA-040070EB_A is a SPST PIN Diode Switch that operates from 4 GHz to 7 GHz. It can handle up to 1 watt.
50 Ohm SPST Absorptive PIN Diode Switch From 4 to 7GHz Rated at Input Power 1 Watts
The SPSTA-040070EB_A is a SPST PIN Diode Switch that operates from 4 GHz to 7 GHz. It can handle up to 1 watt. The PIN Diode switch has an insertion loss of less than 1.2 dB and an isolation of over 60 dB with a VSWR of 1.4:1. It requires a / mA and / mA Supply and has TTL Control. This switch has SMA-Female connectors at the RF Ports.
Key Electrical Specifications
Electronic Specification Note : Values at 25deg , sea level. Test indicators will deteriorate at high and low temperature ;
ESD sensitive material , Transport material in approved ESD bags. Handle only in approved ESD workstation.
Switching speed is 50% TTL to 90% RF ( T- ON ) and 50% TTL to 10% RF ( T- OFF) ; Rise / Fall time : 10% RF to 90% RF and 90% RF to 10% RF
Freq. Range : 4 – 7 GHz
Input Power : 1 W
Insertion Loss : 1.2 dB
Isolation : 60 dB
Switching speed : 100 ns
Control Type : PIN
Operating Temp. : -45 to 85 ℃
Dimension L*W*H : 24*24*9.5 mm
Finishing : Nickel Plated
More details can be seen in data sheet.
| Design Type | SPST |
|---|---|
| Switch Type | Absorptive |
| Freq. Range | 4 – 7 GHz |
| Input Power | 1 W |
| Insertion Loss | 1.2 dB |
| VSWR | 1.4 : 1 |
| Isolation | 60 dB |
| Switching speed | 100 ns |
| Rise / Fall time | ns |
| DC Biasing (-) | 5 / 50 mA |
| Control Type | PIN |
| Operating Temp. | -45 – 85 ℃ |
| Dimension L*W*H | 24*24*9.5 mm |
| Input Connector | SMA-Female |
| Output Connectors | SMA-Female |
| Weight | 22 g |
| Finishing | Nickel Plated |
| Environment | Nominal |
