3-6GHz SP13T Absorptive PIN Diode Switch,SW00313
The SP13TA-030060S_A is a SP13T PIN Diode Switch that operates from 3 GHz to 6 GHz. It can handle up to 1 watt.
50 Ohm SP13T Absorptive PIN Diode Switch From 3 to 6GHz Rated at Input Power 1 Watts
The SP13TA-030060S_A is a SP13T PIN Diode Switch that operates from 3 GHz to 6 GHz. It can handle up to 1 watt. The PIN Diode switch has an insertion loss of less than 3.8 dB and an isolation of over 60 dB with a VSWR of 1.7:1. It requires a / mA and / mA Supply and has TTL Control. This switch has SMA-Female connectors at the RF Ports.
Key Electrical Specifications
Electronic Specification Note : Values at 25deg , sea level. Test indicators will deteriorate at high and low temperature ;
ESD sensitive material , Transport material in approved ESD bags. Handle only in approved ESD workstation.
Switching speed is 50% TTL to 90% RF ( T- ON ) and 50% TTL to 10% RF ( T- OFF) ; Rise / Fall time : 10% RF to 90% RF and 90% RF to 10% RF
Freq. Range : 3 – 6 GHz
Input Power : 1 W
Insertion Loss : 3.8 dB
Isolation : 60 dB
Switching speed : 100 ns
Control Type : PIN
Operating Temp. : -45 to 85 ℃
Dimension L*W*H : 165.1*40*10.2 mm
Finishing : Nickel Plated
More details can be seen in data sheet.
| Design Type | SP13T |
|---|---|
| Switch Type | Absorptive |
| Freq. Range | 3 – 6 GHz |
| Input Power | 1 W |
| Insertion Loss | 3.8 dB |
| VSWR | 1.7 : 1 |
| Isolation | 60 dB |
| Switching speed | 100 ns |
| Rise / Fall time | ns |
| DC Biasing (-) | -5 / 100 mA |
| Control Type | PIN |
| Operating Temp. | -45 – 85 ℃ |
| Dimension L*W*H | 165.1*40*10.2 mm |
| Input Connector | SMA-Female |
| Output Connectors | SMA-Female |
| Weight | 310 g |
| Finishing | Nickel Plated |
| Environment | Nominal |
