1-2GHz SPST Absorptive PIN Diode Switch,SW00002
The SPSTA-010020S_A is a SPST PIN Diode Switch that operates from 1 GHz to 2 GHz. It can handle up to 1 watt.
50 Ohm SPST Absorptive PIN Diode Switch From 1 to 2GHz Rated at Input Power 1 Watts
The SPSTA-010020S_A is a SPST PIN Diode Switch that operates from 1 GHz to 2 GHz. It can handle up to 1 watt. The PIN Diode switch has an insertion loss of less than 0.8 dB and an isolation of over 80 dB with a VSWR of 1.5:1. It requires a / mA and / mA Supply and has TTL Control. This switch has SMA-Female connectors at the RF Ports.
Key Electrical Specifications
Electronic Specification Note : Values at 25deg , sea level. Test indicators will deteriorate at high and low temperature ;
ESD sensitive material , Transport material in approved ESD bags. Handle only in approved ESD workstation.
Switching speed is 50% TTL to 90% RF ( T- ON ) and 50% TTL to 10% RF ( T- OFF) ; Rise / Fall time : 10% RF to 90% RF and 90% RF to 10% RF
Freq. Range : 1 – 2 GHz
Input Power : 1 W
Insertion Loss : 0.8 dB
Isolation : 80 dB
Switching speed : 100 ns
Control Type : PIN
Operating Temp. : -45 to 85 ℃
Dimension L*W*H : 24*20*10.2 mm
Finishing : Gold Plated
More details can be seen in data sheet.
| Design Type | SPST |
|---|---|
| Switch Type | Absorptive |
| Freq. Range | 1 – 2 GHz |
| Input Power | 1 W |
| Insertion Loss | 0.8 dB |
| VSWR | 1.5 : 1 |
| Isolation | 80 dB |
| Switching speed | 100 ns |
| Rise / Fall time | – ns |
| DC Biasing (-) | -5 / 50 mA |
| Control Type | PIN |
| Operating Temp. | -45 – 85 ℃ |
| Dimension L*W*H | 24*20*10.2 mm |
| Input Connector | SMA-Female |
| Output Connectors | SMA-Female |
| Weight | 15 g |
| Finishing | Gold Plated |
| Environment | Nominal |
