0.05-1.4GHz 2-way Lumped Element Power Divider,PD00532
The PD50M014-2S_B is a 2-way power divider with 50 ohm SMA-Female connectors operating from 0.05 GHz to 1.4 GHz with a maximum input power of 10 Watts CW.
50 Ohm Wilkinson SMA-Female 2-way Power Divider From 0.05 to 1.4 GHz Rated at 10 Watts (CW)
The PD50M014-2S_B is a 2-way power divider with 50 ohm SMA-Female connectors operating from 0.05 GHz to 1.4 GHz with a maximum input power of 10 Watts CW. The PD50M014-2S_B has an Insertion Loss less than 0.8 dB, minimum Isolation 17 dB, the Amplitude Balance is 0.2dB maximum.
Key Electrical Specifications
Note : Electrical Specifications measured in a 50Ω system, Values at 25 ℃
Type : Lumped Element Power Divider
Freq. Range : 0.05 – 1.4GHz
Insertion Loss : 0.8 dB
Amplitude Balance : 0.2dB
Isolation : 17
Dimension L*W*H : 28*28*12.7 mm
Input Connector : SMA-Female
Finishing : Paint Black
Environment : Nominal
More details can be seen in data sheet.
| Power Divider Type | Lumped Element |
|---|---|
| Number of Output Ports | 2-way |
| P / N | PD50M014-2S_B |
| ID | PD00532 |
| Freq. Range | 0.05-1.4 GHz |
| Nominal Splitter Loss | 3 dB |
| Insertion Loss | 0.8 dB |
| Input VSWR | 2:1 |
| Output VSWR | 1.7:1 |
| Amplitude Balance | 0.2 dB |
| Phase Balance | 3 deg |
| Isolation | 17 dB |
| Operating Temp. | -45-85 ℃ |
| Dimension L*W*H | 28*28*12.7 mm |
| Input Connectors | SMA-Female |
| Output Connectors | SMA-Female |
| Weight | 35 |
| Finishing | Paint Black |
| Environment | Nominal |
