DC-18GHz 2-way Resistive Power Divider,PD00367
The PDDC180-2SMF_B is a 2-way power divider with 50 ohm SMA-Male connectors operating from DC GHz to 18 GHz with a maximum input power of 1 Watts CW.
50 Ohm Wilkinson SMA-Male 2-way Power Divider From DC to 18 GHz Rated at 1 Watts (CW)
The PDDC180-2SMF_B is a 2-way power divider with 50 ohm SMA-Male connectors operating from DC GHz to 18 GHz with a maximum input power of 1 Watts CW. The PDDC180-2SMF_B has an Insertion Loss less than 1.5 dB, minimum Isolation 10 dB, the Amplitude Balance is 0.5dB maximum.
Key Electrical Specifications
Note : Electrical Specifications measured in a 50Ω system, Values at 25 ℃
Type : Resistive Power Divider
Freq. Range : DC – 18GHz
Insertion Loss : 1.5 dB
Amplitude Balance : 0.5dB
Isolation : 10
Dimension L*W*H : 19.08*16.56*10 mm
Input Connector : SMA-Male
Finishing : Gold Plated
Environment : Nominal
More details can be seen in data sheet.
| Power Divider Type | Resistive |
|---|---|
| Number of Output Ports | 2-way |
| P / N | PDDC180-2SMF_B |
| ID | PD00367 |
| Freq. Range | DC-18 GHz |
| Nominal Splitter Loss | 6 dB |
| Insertion Loss | 1.5 dB |
| Input VSWR | 1.4:1 |
| Output VSWR | 2.5:1 |
| Amplitude Balance | 0.5 dB |
| Phase Balance | 5 deg |
| Isolation | 10 dB |
| Operating Temp. | -45-85 ℃ |
| Dimension L*W*H | 19.08*16.56*10 mm |
| Input Connectors | SMA-Male |
| Output Connectors | SMA-Female |
| Weight | TBD |
| Finishing | Gold Plated |
| Environment | Nominal |
