0.01-1GHz 2-way Lumped Element Power Divider,PD00098
The PD10M010-2S_B1 is a 2-way power divider with 50 ohm SMA-Female connectors operating from 0.01 GHz to 1 GHz with a maximum input power of 1 Watts CW.
50 Ohm Wilkinson SMA-Female 2-way Power Divider From 0.01 to 1 GHz Rated at 1 Watts (CW)
The PD10M010-2S_B1 is a 2-way power divider with 50 ohm SMA-Female connectors operating from 0.01 GHz to 1 GHz with a maximum input power of 1 Watts CW. The PD10M010-2S_B1 has an Insertion Loss less than 1 dB, minimum Isolation 20 dB, the Amplitude Balance is 0.3dB maximum.
Key Electrical Specifications
Note : Electrical Specifications measured in a 50Ω system, Values at 25 ℃
Type : Lumped Element Power Divider
Freq. Range : 0.01 – 1GHz
Insertion Loss : 1 dB
Amplitude Balance : 0.3dB
Isolation : 20
Dimension L*W*H : 28*28*12.7 mm
Input Connector : SMA-Female
Finishing : Paint Black
Environment : Nominal
More details can be seen in data sheet.
| Power Divider Type | Lumped Element |
|---|---|
| Number of Output Ports | 2-way |
| P / N | PD10M010-2S_B1 |
| ID | PD00098 |
| Freq. Range | 0.01-1 GHz |
| Nominal Splitter Loss | 3 dB |
| Insertion Loss | 1 dB |
| Input VSWR | 1.3:1 |
| Output VSWR | 1.3:1 |
| Amplitude Balance | 0.3 dB |
| Phase Balance | 3 deg |
| Isolation | 20 dB |
| Operating Temp. | -45-85 ℃ |
| Dimension L*W*H | 28*28*12.7 mm |
| Input Connectors | SMA-Female |
| Output Connectors | SMA-Female |
| Weight | 35 |
| Finishing | Paint Black |
| Environment | Nominal |
